Single Phase Rectifiers / Battery Charger
Technical Data Sheet
Breakers:
- AC input
- DC output
- DC Battery Disconnect (Optional)
Meters:
- DC ammeter
- DC Voltmeter
- DC Charge/discharge (CCB type only)
Regulation +/-1% or better
Overcurrent limiting inherent in design
Ripple less than 1% on a resistive load
Fully protected from transients and surges
Control unit with the following standard features and indicators:
- AC Input Power on Indicator
- Battery Charged Indicator
- Float adjustment preset at factory
- Electronic current limiting
- Electronic soft start
- Overvoltage sensing and shut down with lockout
Optional Features and Indicators:
- Chargeer on equalize indicator
- Charger on float indicator
- BATTERY TEST CONTROL - Push button feature that places the complete plant load onto the battery under discharge conditions. The charger automatically resumes normal operation when the battery reaches 1.85 VPC. A resettable elapsed time hour-meter records the time duration of the discharge. Manual initiate and cancel buttons.
- Battery recharge current limiting adjustable - preset at the factory to correspond to project specific battery requirements.
- Float and equalize independantly adjustable.
- DC Equalize timer - 2.5/24 hour adustable equalize timer. Auto-equalize at 2 VPC. Manual initiate and cancel pushbuttons.
Combined Alarm Unit with the following indicators and dry From 'C' Contact:
- AC fail
- Control unit fail
- DC low voltage
- Battery end of discharge
- Positive ground
- Negative ground
Internal terminals for connections and alarms
Front access to all equipment
 |
 |
 |
 |
|
|